2011 Scania R480 LB 6x2*4 HNB - 945.746 km - insulated cabinet with aggregate - Zepro rearlifter - Automatger - 353 kW / 480 hp diesel - total mass 27,000 kg and vehicle train weight 66,000 kg - air suspension on all axles Scania R480 three-axle truck in configuration 6x2*4 and insulated cabinet building. The mileage is 945.746 km, the engine was replaced by Scania a few years ago The engine is a diesel engine having a cylinder capacity of 12,740 cm3 and a maximum net power of 353,0 kW, corresponding to 480 hp. The gearbox is automatic. Engine brake The rear lifter is marked Zero and has the CE marking type plate. The towing vehicle coupling is made of manufactured Rockfinger, commercial name RO*57 FLEX, with D-value 260,0 kN and permissible vertical coupling load 1000 kg. The vehicle has air suspension on all three axles and axle 3 is the lifting axle in the 6x2*4 configuration. The cab is a sleeping cabin with berth, and the vehicle has recording equipment, radio. The car is equipped with a Thermoking unit with its own diesel tank and keel, freezer and heating. Fully automatic transmission box with 2 pedals. The box has offroad mode with crab gears, as well as power and standard mode. The offroad mode makes it easier to manoeuvre on narrow swinging roads with a lot of gradient, or at precision runs at narrow spaces. Air suspension both at the front and at the rear with height adjustment. Active steering on the last axle makes the car very lightly driven and makes it very easy to turn in tight places and drive on swingy narrow roads. Comfortable half-high cottage with 2 berths, the lower one has new deluxe overmatrass. Coffee funnels and refrigerators and freezers. Back camera. Webasto with control from bed. That's weird. Hydraulics for Zepro rear lifts Insulated cabinets with aggregates according to the State Road Administration Skapggbygg fra Specialkarosser AB, SKAB, Sweden Zepro rear lifts bearing the CE marking type plate Automoulders Engine power 353 kW corresponding to 480 hp Engine capacity 12,740 cm3 Three axles in configuration 6x2*4 with lifting axle Air suspension on all three axles Permissible total weight 27000 kg Max wagon weight 66,000 kg Permissible trailer weight with brake 40,500 kg Drawbar coupling Rockfinger RO*57 FLEX with D-value 260.0 kN Sleeping cabin with keel Tachograph Scania Service History Load safety rails in the cabinet Side doors of the cabinet Euro 5T emission class Speed limiter 90 km/h 56 cubic meters cabinet, 21 pallet spaces. The cabinet has an internal length of 840 cm, an internal width of 250 cm and an internal height of 270 cm.