Manufacturer: Toro Model: LT-F 3000 First authorisation: 29.03.2019 Operating hours: 1,384 hours Next HU: 03/2027 Next UVV test: is due   At the most diverse parts of the body, the underbody, the frame and the plastic claddings and plastic containers are available due to the mowing insert bumps, scratches and partly rust infestation. In the mower deck as well as the grass catcher there is still grass cut of the last mower insert. Due to the former bonding, the paint knows color differences. On the drive units, oil pumps and oil-bearing pipes, some light oil leaks can be seen on the seals. Different hoses are roughed or porous. In the entrance areas and in the footroom, signs of wear and dirt are visible. The upholstery of the driver's seat is dirty.     The following defects or damages are known.   Engine: The holding plate on the exhaust is loose. Maintenance is due.   Chassis: The rear axle suspension is knocked out. The handlebar game is larger than normal.   Mower: Mounting of the mower unit at the front bent. Roll of the mower unit beaten out. Height adjustment defective. The knives and bows are closed. Oil engine of knife shaft leaks.   Driver's cabin: The roof was temporarily repaired in various places.   Lighting: The turn signal at the front right is defective. The horn is without function.     Technical data: (Excerpt from the technical description.)   Model: LT-F3000 TM Ident. No: 30659404931148 Engine: Kubota.V1505T, water-cooled four-cylinder turbo diesel engine, 33 kW (44.2 hp) at 3000 rpm Drive: four-wheel drive — hydrostatic, closed circuit (lock differential as basic equipment) Fuel tank: 45,7 litres — for a full day in use • Steering: Hydraulic rear steering with shock protection Brakes: Oil-dipped disc brakes controlled by an electronic on/off switch. Tyres: front: 26 x 12 - 12, 4 PR, lawn profile / back: 200 10 - 8, 4 PR , grass profile Driving speed: Forward: 0 to 25 km/h / Back: 0 up to 11 km/hr Floor pressure: 0.69 - 1.38 bar depending on the lawn conditions Seat: Fully adjustable seat with armrests. Adjust forward and rear, adjustable height and backrest with mechanical suspension Operator safety: Cutting unit drive is decoupled when the operator leaves the seat. Engine only starts when the forward/reverse pedal is in neutral position, the parking brake is activated and the cutting units are uncoupled. Cutting units can only be lowered after activation. Hangability: (max.) 20 degrees (with rollbar) 16 degrees (including cabin)   Dimensions Total length: 3,000 mm Cutting width: variable from 762 mm to 2,120 mm Height: 2.160 mm (with roll bar) 2.090 mm (including cabin) Wheelbase: 1.525 mm Transport width: 1.575 mm Weight: 1,380 kg (with rollbar) 1,580 kg (including cabin)   Cutting units Type: Three independent hydraulic wheel mowers with a diameter of 275 mm and a width of 762 mm Configuration of the unit: Sixteen fine TEMPESTT. cutters per cutting head. Slight rear roller over the complete width. Cutting height: infinitely adjustable between 20 mm and 75 mm   The device is deregistered, issued without a license plate. The engine starts and the mower can be loaded independently. The device can be used. However, an acceptable cut is no longer available.   A survey before bid is recommended. Visit only by appointment. A valuation is not available.   Further pictures of the machine, technical details, data according to the approval certificate, the last reports of the main examination and UVV test can be sent if necessary.   For the auction only the offered turf mower. Any other visible objects on the pictures will not be auctioned. Pick-up only! The collection is only possible after payment has been received and takes place no later than 10 days after payment is received. The acquirer has to organize the collection and loading as well as the load securing at his own expense and risk, to encourage and carry out. For legal reasons, no support can be provided when loading.