UV disinfection system of the manufacturer WEDECO type B40 DVGW certified (year of construction 2006)   Fully functional. Condition needed. Functionality tested before expansion. Optical condition good.  CE license plate is available. No damage. Traces of use: Surface contact rust at the reactor through the temperature sensor (50 x 200 mm, see photo)     Max. throughput 26,8 m3/h T 1cm: min. 95,9 % UV dose: min. 400 J/m2 Alarm: 144 W/m2 UV sensor; S013599 Installation position: lower end SEC-Display: English Documentation   Multi-beam system Stainless steel reactor with concentric UV spotlights Calibrated UV measuring device with display in W/m2 and standard signal output Softstart Zündsystem H/A control & nbsp; Electronic function monitoring of each UV emitter Digital operating hours and switching pulse counters  Cleaning and sum disturbance message Rinsing or emptying valve Sampling valve   UV system consisting of:   1 UV reactor housing: Material: stainless steel 1.4571 (316Ti) Flange connection: DN 150 Empty weight: approx. 42 kg Volume: approx. 26 l Dimensions (WxHxD): 900 x 305 x 210 mm Water temperature: 5°C - 60°C Permissible operating pressure: 10 bar Protection class: IP 65   3 UV spotlights:  Type: SLR 2581 Design: Hg low-pressure "Spektrothermahler" Radiator power: 120 watts Radiation flux 254 nm: 43 watts Radiator life: min. 8,700 h (were replaced every 2 years, average operating time 8,500h/year)   3 Spot protection tubes: Design: Expandable, closed on one side Material: Pure quartz   1 UV sensor: Accuracy: +/- 4%, selectivity: > 99 % at 254 nm, linearity: +/- 1 % Ageing: max. 2 % / year   1 control cabinet Steel sheet, RAL 5002, 4 x 16 drawing display, ready to connect with cable Assembly: selector switch Hand-0-Automatics, fuses, ballasts, compensation capacitors, UV-intensity and radiation monitoring electronics Displays: operation, cleaning, fault, irradiance, operating hours, switching pulses Outputs without potential: operation / fault, cleaning Analog output: 0/4 - 20 mA (radiation strength) Protection class: IP 54 Ambient temperature: +5°C - 30°C Dimensions (WxHxD): 760 x 760 × 300 mm Weight: about 40 kg Operating voltage 230 V, 50/60 Hz Power supply: 1 L/N/PE Connection power: 0.42 kW / 0.45 kVA