Year of construction: 2022 Manufacturer: PALMS Model: Eifo 8.70 SE-22 Identification number: 24979 Front tyre dimension: 400/60-15.5 Rear tyre dimension: 400/60-15.5 Zul. Total weight (t): 8,0 GeneralManufacturer: Palmse Mehaanikakoda OÜ, EstoniaBrand: PALMS / EIFOModel of the forest trailer: 8.70 SE-22Can model: PalMS FK 3.61Can series number according to offer: 29806Execution: wooden backcar/forest trailer with forest crane and ramp-up brakeCE markingExperts available for obtaining an operating permitTechnical dataLoad volume: 8,70 room metersSuitable wood length: up to 5,100 mmOperating pressure of the crane: 190 barBrutto stroke: 33 kNm at 190 barSwing torque: 9.0 kNmmSwing range: 370°Swinging unit: 4-cylinder monoblock swinging unitLow roller bearing instead of a brass bushingAdditional offer information: approx.460 kg with full crane length, without pliers, rotator and jointEndless rotator: 3,000 kg with shaftWide angle joint for optimized crane geometry and Movement sequencesHydraulic cables protected and space-saving installationHydriac hoses as far as possible with metric threadsHydraulic functions: 8Control via 2 cross levers and 4 tilt leversTrotary lever control as an upgrade instead of the PALMS Euro control 2/4Hydroulic drawbar steering with one cylinderPALMS inrun brake with "Rückmatic-Return-AutomaticsInrun brake on the front wheel set Additional hydraulic brake at the rear bogieStainless steel ropesRunning: PALMS 400/60-15.5Hub capacity580 kg at 4,000 mm350 kg at 6,100 mmFront mounted PAL MS forest craneTelescopic boomPALMS tongs with continuous rotorMassive stroke cylinder protectionSmall hydraulic A support with three-point mountingComfort-mandatory, foldableEccentric ladder as Lifting aidControl unit holderAdjustable and height-adjustable backrestHolding for hydraulic hoses and power cablesStandard upper suspensionRangs: four pairs, rotatableFire gratings to protect the operating areaFoldable lightingBacklights, retro-reflectors and lateral reflectorsUnderlay wedgesLoad protection set LSS-8High-quality KTL and powder coatingConstruction of high-strength steels, including Strenx SteelManual and Declaration of ConformityDimensionsCrane length: 6,100 mmMaximum range with telescope: 6,400 mmTelescope section according to dimensional drawing: 1,850 mmDeveloped base/extension section: 2,395 mmMast height according to the dimensional marking: 1,140 mmLoad frame surface: 1,70 m2Central frame: 160 × 160 × 6 mmAxle stub: 60 × 60 × 6mmLength opening: 1,040 mmNotes of the SellersNo defects knownFully functionalImmediately ready for useLoading aid without lifting platform is available.