The grandstand is a tribune with 3-8 rows of seats (800mm each) and a height of steps (200mm each). The total height of the stands is 1800mm and the total length is 5850mm. A floor element has a length of 2.00 m and a width/depth of 1.16 m.   It consists essentially of the floor elements, the bench beams (partly with wooden beams, partly with bench beams and seat hollows), the posts and the stiffening elements in the transverse and longitudinal direction. These are arranged in a transverse direction in the marked posts. There are 1-3 diagonal bars in the longitudinal direction depending on the size. They consist of two interlocked square tubes with a bolt connection. Due to the arrangement of joints between the horizontal beams and the posts, the grandstand can be folded in the diagonals after removing the bolts and stored in a space-saving manner. The supporting elements consist of the aluminium alloy ALMg Si 0.5 F 22, the fuse bolts made of stainless steel V4A. There are no welding connections available. The front and top row of seats are fitted with pluggable railings. The stairways are the same, only 1500 mm wide and with an upper row of seats. The seating stand can be set up both indoors and outdoors.   The grandstand consists of the following elements:   10 pieces Tribune elements Length: 2.00 m 1 piece tribune element length: 2.00 m  2 pieces Tribune element length: 1.00 m 3 pieces Tribune element length: 1.00 m 11 pieces railing elements rear length 2.00 m 5 pieces railing elements rear length 1.00 m 1 piece of transport trolley   The instructions can be requested by e-mail.   The grandstand is in unused condition. There are no signs of wear.