Complete ESS Energy storage system - Rittal cabinet - 3-phase, 15 kW / 36.9 kWh Housing: Rittal case, 1800 x 600 x 500 mm (h-w-d) Complete and ready-to-use energy storage system (ESS/ home battery on an industrial scale), neatly built in a robust Rittal cabinet. The system is already equipped with a basic configuration and can therefore be used quickly, for example for peak shaving, emergency power supply or optimization of own generation. Battery Specifications 2x battery pack, made up of LiFePO4 cells of 360Ah Total 32 cells, configured at 48V nominal Total Capacity: 720Ah @ 51.2V nominal ≈ 36.9 kWh installed capacity Inverters 3x Victron Multiplus II 48/5000 (3-phase deployable) Continuous power: 3 x 5000VA = 15 kVA/15 kW (5 kW per phase) Peak power: 3 x 10,000W = 30 kW momentary Charging power: 3 x 70A ≈ 10 kW Total Monitoring & control Victron Cerbo GX with 5" GX Touch display Already equipped with Basic configuration, instant boot Mains energy meter available for metering consumption/feed-in Security/Connection 2x circuit breaker C25 (net-in and critical load out) In a nutshell Deployed battery capacity: ±Deployed battery capacity: ± 36.9 kWh Continuous AC Power: 15 kW (3-phase) Peak power: up to 30 kW Charging power: ± 10 kW Case dimensions: 1800 x 600 x 500 mm Suitable for Peak shaving / lowering your peak load (lower power contract) Critical load backup power Optimization of self-consumption in combination with solar panels Relief from the grid at grid congestion