A universal machine tool, model UW1/K by Meyer & is available for auction Burger. Year of mechanical engineering: 1982 Serial number: 2585   Dimensions:  Height: 150cm Width: 110cm Depth: 70 cm For transport, the lower table can be separated from the machine. Weights:Lower table: approx. 40 kg Machine: approx. 70 kg     The machine can be converted by a few steps, so that the following possibilities of use arise: Lace lathe Head turntable Horizontal and vertical milling machine Drilling machine with feel lever Horizontal drilling rig Vertical boring machine   The machine stands together with extensive accessories for auction. Operating instructions Volume of tables, metrics Special accessories acc. to Delivery note from 1982: Three-baked chuck diameter 100mm with flange, heading number 01 Universal panel with 4 clamping jaws, position 02 Grain tip rotating with shaft MK1, heading number 03 Swivel and tilting table, heading number 36 Compression device, complete, , position number 35 1 set (= 3 pairs) Spannbriden, heading number 14a 1 set (=6 pairs) tensioners, position number 14b (Incomplete, only 5 pairs) Machine screw, rotatable with grading, , position number 23 Pins and pins in diameters 13; 16; 22; 27 mm and 1", heading No 36 Milling pins in diameters 22; 27 mm and 1" with intermediate rings and nut, heading No 37 Counter support, heading No 38 Flange for three-baked chuck, diameter 125 prefabricated, heading No 48 Intermediate wheel with bearing for automatic feed at 210 mm peak height The scope of accessories can be found in the pictures. No guarantee can be given for completeness up to the last screw.    In recent years, the machine has not been used.  The machine is still in a heated workshop hall. The general condition of the machine is very good. On the interchangeable gears superficial flight rust is recognizable. Plan running and flatness of the beds were not tested.   The location of the machine is in 59379 Selm. The buyer has to collect the machine there personally after the auction and payment and to ensure the correct loading and lashing itself.