Hilti DX 450 – Specifications Hilti DX 450 is a cracked bolt gun for mounting nails and thread bolts in concrete and steel. Property Specification Type of operation Crushed, indirect piston principle Weight approx. 3,2 kg Length 350 mm Maximum nail length 72 mm with standard equipment Patron Hilti 6.8/11 M, strip with 10 cartridges Cartridge strengths Green, yellow, red and black Maximum energy about 380 J/Nm declared with black cartridge Power adjustment Stepless adjustable Construction power prior to firing at least 90 N Construction movement 18 mm Recommended capacity Max. 500 additions per hour Underlay Concrete and structural steel Anchoring agents NK-/ENK-spike and various M6-M10 thread bolts State: uncertainty as it is not tested. Bosch GSC 160 Professional Formsaks Electric plate saw for straight and curved cuts in metal sheet. Specification Data Power 500 W Output power 270 W Impact, not loaded 5000 beat/min Impacts under load 3500 stroke/min Max. steel 400 N/mm2 1,6 mm Max. steel 600 N/mm2 1,2 mm Max. stainless steel 800 N/mm2 0,7 mm Maximum aluminium 200 N/mm2 2,2 mm Minimum curve radius 35 mm Weight 1,8 kg State: Uncertainly they are not tested. Bosch GSC 2.8 Professional Forms Net-powered sheet saws calculated for straight sections and curves in relatively heavy metal plates. Specification Data Engine power 500 W Max. ordinary steel, 400 N/mm2 2,8 mm Harder steel, 600 N/mm2 2,2 mm Stainless/hard steel, 800 N/mm2 1,9 mm Aluminium 3,5 mm Rate of impact without load 2400/min Impact rate under load 1500/min Minimum cutting radius 38 mm Weight 2.7 kg Product code 0 601 506 103 State: uncertainty as it is not tested. Dreyco 3514-2 Tube cuts Specification Data Power 500 W Voltage 230 V Normal steel, 400 N/mm2 up to 2,0 mm Stainless steel, 600 N/mm2 up to 1,5 mm Hard stainless, 800 N/mm2 up to 1,3 mm Aluminium/copper/sink up to 3,0 mm Slip in steel up to 4 × 0,9 mm Light Metal fading up to 6 × 0,75 mm Impact number 2400 beats/min Work speed approximately 5-7 m/min Minimum cutting radius approx. 200 mm Weight approximately 2,0 kg Take-off hole required approx. 14 mm It is especially suitable for spiral pipes, ventilation ducts and the like. State: uncertainty as it is not tested. But starts when power is switched on. Cell Z1J-KR10-13 concrete drill Effect: probably 1050 W Voltage: 230 V / 50 Hz Chuck: 1.5–13 mm fastchuck Speed: two gears, approximately 0 to 1200 / 0 to 3000 rpm Functions: ordinary drilling and percussion drilling Stepless speed control Right/Left Side handle and depth stop Approximate drilling capacity: 13 mm steel, 16 mm wall/beton and 30 mm wood Condition: uncertain as one is not functionally tested. But starts when power is switched on. Würth EWS 7-125 Compact electric angle clips intended for easier cutting and grinding. Specification Data Power 720 W Voltage 230 V Dial diameter 125 mm No load speed up to 11000 rpm Spindle thread M14 Weight 1,8 kg Line 4 metres Security Reboot protection Article No 5707 012 0 State: uncertainty as it is not tested. But starts when power is switched on. It is encouraged to inspect the tool before purchase. It's in Trysil. For more information and agreement on the view, contact Kåre at the Auction. Mobile: 480 73 098 or by e-mail: kaa@auction.com See several auctions from the same seller.