CMS Pentax 4.50 CNC machine for wood processing. The machine is lit to be 5-axleled. Type plate shows manufacturer C.M.S. S.p.A., annual model 2005, serial number 3803 and model/type PENTAX 4.50/T-PX5+L.RR. The machine has worktables, processing units, tool changers, suction connections, control cabinets, operator panel and hand control. Tool holders are shown in the images, but they do not include any tools in the holders. Some dismantled tea ovens/tubes are included, see pictures. The machine is sold as repair object/partial machine. The purchaser himself must be responsible for dismantling. SPECIFICATIONS Make: CMS / C.M.S. S.p.A. Model/type: PENTAX 4.50/T-PX5+L.RR Annual model: 2005 Serial number: 3803 Machine type: CNC woodworking machine Number of axes: enlightened 5-axis Voltage: 400 V ± 10 % Phases: 3 Frequency: 50/60 Hz Full load current: 51 A Max. allowable short circuit flow rate: 10 kA CE marking: yes Included: Governance Operator panel/control Hand-operated Tool Switcher Some tea ovens/tubes as shown on images Documentation/manuals as displayed on images No tools in the tool holders are included. NOTES The purchaser himself stands for the dismantling of the machine. Some bucket extract is included as shown on images. A loose hedge/component has been observed in the hedge. The door magnetic lock does not work. This is uncertain because the machine is not connected to power. Luke's standing up with an act. Gas dampers are assumed to be defective, but this is not functionally tested. List/support is loose. There is visible damage/rift in blue protective clothing. Use marks/slips occur.