The cable-bound combi hammer offered here is used at the previous school location age-relatedly as economically and is now needed but in working condition with original hardshell case and device description to be used in this way. An exact initial acquisition date is no longer documented by the provider.   Excerpt Description: Manufacturer: METABO (72622 Nürtlingen / Germany), SDS-plus KHE 2443 combihammer (wired), model no.: 6.00597.00, sales period approx. 2010 to approximately 2016. Functions: Drilling, hammer drilling, chiseling. Technical data acc. to Metabo operating instructions: SDS-plus chuck, nominal capacity 800W, output power 410W, idle speed 0-1150/min, speed under load 960/min, max. impact number 5400/min., impact energy 2.4J, masonry with drilling crown 68 mm., steel 13 mm. Outer dimensions case HxWxT = 34x3715 cm, weight with case about 3 kg. The article has light dust deposits specific for use, otherwise it is in good condition. Damages are obviously not recognizable. CE identification number available.    Factors affecting value: partial fine dust adhesions and test stickers are apparent. Special information: The inspection before bidding is expressly recommended and is possible in individual cases even outside the usual business hours. The object of the auction is exclusively the article described here. On the attached photos possible other recognizable articles are not the subject of this auction! Due to the light conditions on site, the actual hue may differ from the color scheme shown in the photos.