Note:The device has not been used for several years. At that time (about 2022) everything worked. Since then, the device has not been used or tested.  Pick-up / inspection: Several people are mandatory during the pick-up. If necessary, by mobile lifter / forklift. A vehicle with lifting platform would be advisable.   Condition: The machines have normal common traces of wear (shoe and abrasion marks on the working and support surfaces). The condition is generally good to very good. At some metal points there is a bit of rust.    FS 41 thick planing machine (Abricht- und Dickenplanbelmaschine)   The FS 41 from the year 1989 is a combined set-up and thickness planer of the manufacturer GEA / SCM (Minimax). These robust industrial machines made of solid steel and cast construction weigh over 500 kg and are valued for their extreme durability and precision in carpentry workshops.   Technical data (model 1989) Plan width: max. 410 mm Knife shaft: Often equipped with a modern 4-tersa blade shaft (quick change system) or a classic striped blade shaft. Shaft diameter / speed: 120 mm diameter at 5,000 rpm. Engine power: Mostly 3.0 kW (approx. 4 hp) up to 4.0 kW high current drive. Feed speed: 2 steps (8 and 14 m/min) for thick planing. Max. planing height (thickness): 230 mm. Dimensions & Weight: ca. 2,040 mm (length) × 1,180 mm (width) x 1,100 mm (height) Adjusting measure at a weight of ca. 560 kg. Typical features   Foldable alignment tables: Foldable two-part to the rear, often synchronized on both sides for quick conversion to thickness. Precise guidance: table height adjustment via double joint shafts and hand wheel with mechanical dimension indicator (lunge indicator at stop). Safe entry: Divided or obliquely toothed steel infeed roller and a springed outfeed roller.