Note:The devices have not been used for several years. At that time (about 2022) everything worked. Since then, the devices have not been used or tested.  Pick-up / inspection: Several people are mandatory during the pick-up. If necessary, by mobile lifter / forklift. A vehicle with lifting platform would be advisable.Condition: The machines have normal common traces of wear (shoe and abrasion marks on the working and support surfaces). The condition is generally good to very good. At some metal points there is a bit of rust.    Technical standard data HEMA UH630 high performance band saw (model 1994) (CE marking available) Roller diameter: 630mm Cutting height: approx. 350mm to 385mm Cutting width: approx. 600 mm to 610 mm Saw blade length: approx. 4.500 mm Engine power: Mostly 3.0 kW (three-phase / 400 V), often also pole switchable or with continuous drive Table size: approx. 630 x 920 mm, swivelling up to 20 degrees or 45 degrees Total weight: approx. 380 – 550 kg   Welding machine for sawmills BSS 040 from IDEAL plant (model c. 1990) (no CE mark available) Technical data & Welding areas  · Power at 50% ED: 4 kVA  · metal band saws*: 6 to 27 mm wide; · wood band saws: 6 to 40 mm wide; · Max. cross-section (band steel) at St 37 or the like : 35 mm2 · Max. clamping width (band steel): 40 mm  Dimensions and weights · Weight net / gross: approx. 64 / 94 kg • Dimensions packaging (W x H x D): approx. 720 x 590 x 630 mm