CUTTING CENTER FOR STRUCTURAL BEAMS "CT800" CV 20, blade diameter 800 mm. Total weight without tables kg.2900 Complete with: Carbide blade diameter 800 mm., F40, Z=48, S=7 N°5 axes controlled by the controller: - Worktable rotation (0°-300°) (Worktable rotation speed 9 sec. every 180°) - Blade tilts from 90° to 45° (Blade tilts speed 20 sec. from 90 ° to 45 °) - Raising the blade (speed 15 sec. every 10 cm.) - Beam drive and measurement (speed at 17 mt/min) - Motorized movement of the table in relation to the rear guide (total movement ofthe table 600 mm.) Sensor for reading the beginning of the beam Pair of vertical cylinders for cutting optimization management Cutting Accuracy: +/- 2 mm. on a beam of mt.10 (straight beam) +/- 0.2° on the rotation angle of the table in work +/- 0.2° on the angle of inclusion of the blade Management and Control System: Industrial Touch Screen PC Working system Windows USB Ethernet Door Cutting Capacity: Minimum cutting section: mm. 120 x 45 90° with a single cut: mm.280x290 / 250x390 / 200x450 90° with cuts in sequence mm.280x770 / 250x840 At 45° with a single cut: mm.200x210 45° with sequence cuts: mm.200x760