The manual mass comparator (see Figure 1) is a high-precision measuring instrument for professional laboratory and metrology use. It serves for error-free, standard-compliant testing and calibration of test weights as well as ASTM standards, whereby measurement data and environmental conditions are recorded directly. Typical applications are calibration laboratories for masses, legal metrology and calibration offices as well as research and quality control in the industry or for internal calibration of piston stroke pipettes. Technical data:   · Model: Cubis MCM 36 · Brand: Sartorius · Type: Manual mass comparator · Serial number: 33007141 · Maximum load (capacity): 31 g · Readability: 1 μg (0.001 mg) · Diameter: 30 mm (round scale) · New value: € 21,682 • Age: 2015   Special feature: The balance consists of a separate electronic and weighing module to minimize thermal influences on the measurement result. It also has a fully automatic adjustment function (isoCAL) and an easy-to-use, manual glass wind protection. The small internal windshield can be rotated and the side of the opening programmed. Especially the integrated sensor technology by the built-in climate module for the detection of temperature, humidity and air pressure is to be emphasized. Condition description: The scale is fully functional. It was maintained annually by the manufacturer Sartorius and calibrated in a two-year rhythm DAkkS. Regular maintenance and careful equipment maintenance ensure the very good condition of the mass comparator. The wind protection is completely intact; there are no visible scratches or flaws on the weighing module or glass doors. Only in the sliding area of the sliding glass doors are slight impurities by dust particles visible. Scope of supply: - Electronic module (CE plate) - Weighing module ( CE plate)- Power supply (CE certificate)- Connection cable If a shipment should take place, then, by the manufacturer, it is strongly recommended to use an original carton for transport!