Selco Neomig 2000 XP MIG and MAG welds - 400V three-phase - 200A at 24V - digital control panel - fitted to chassis - with welding gun, ground clamp and wire harness Selco Neomig 2000 XP is a thread-fed MIG and MAG welder from Selco S.r.l. in Italy, built on a red four-wheel chassis. The machine has a two-display digital control panel, a main switch, a step-by-step voltage selector and a wire feed speed. The type plate specifies 200A at 24V, idle voltage 19V, connection 230V and 400V, 50/60 Hz and enclosure degree IP 21 S. The machine has a built-in wire mat with a sling holder, a welding gun with a hose pack, a ground clamp and a connector cable with a blue three-phase plug. TECHNICAL DATA Mark: Selco S.r.l., Onara (Padova), Italy Model: Neomig 2000 XP Serial number: N 01026000001 Standards: EN60974-1, EN60794-5, EN 60974-10 Class A Welding current: 200A at 24V Idling voltage: 19V Flow steps: 200A, 130A and 100A Net voltage: 230V, I1max 21A, I3eff 10A Network voltage: 400V, I1max 12A, I1,eff 5,5A Frequency: 50/60 Hz Capacity: IP 21 S