A used Wacker BS 60-2 vibration stamper with Wacker WM 80 two-stroke petrol engine is offered.   The device comes from a used municipal stock and has corresponding traces of use due to age, use and storage. A technical functional test was not carried out. The vibration stamper is therefore expressly offered as a hobby device / untested / functioning unknown.   Technical data   Manufacturer: Wacker Model: BS 60-2 Equipment type: Vibration Stamper / Petrol Stamper Year of manufacture engine: 2009 Engine: Wacker WM 80 Engine type: air-cooled single-cylinder two-stroke petrol engine Capacity: 80 cm3 Fuel: petrol/two-stroke oil mixture Operating speed: approx. 4,400 rpm Impact force: approx. 18 kN Impact number: approx. 687 beats/min Working speed: approx. 9.8 m/min Stamp foot width: approx. 280 mm Stamp foot length: approx. 340 mm Dimensions: approximately 673 × 343 × 965 mm (L × B × H) Operating weight: approx. 66 kg   The mentioned technical data are partly based on manufacturer specifications for the corresponding model series. Deviations due to the concrete execution or the year of construction are possible.   Condition The device is in a clearly used condition. Among other things, it can be recognized:   Contamination and dust deposits on housing, engine area, bellows, stammering unit and stammer foot Scratches, scratches and scouring spots on the green plastic/housing cladding Abrasion of paint, scratches and shock marks on the black surrounding protective and guide iron; in some places the coating is rubbed down to the metal Scratches and abrasion marks on the side metal and engine body parts superficial corrosion/rusting approaches on different metal parts, especially in the area of the stamping foot, the fittings and individual fastening parts significant abrasion, pollution and working traces on the stamping foot or on the base plate, according to the previous use Pollution and discoloration in the engine and engine cover area Stickers, labels and warnings have some age-related and usage-related wear and tear.   A further technical status assessment was not carried out.   Function check A functional test has not been performed. In particular, the following were not examined:   Engine and start behaviour Ignition system Carburettor and fuel system Coupling Stamping/stroke mechanism Bellows Lubrication Controls Tightness Other mechanical and technical components   Therefore, no statement can be made about the functionality. Defects, leaks, wear, missing or damaged components as well as other technical defects cannot be excluded.   THE OTHER ARTICLES RELATING TO THE PROCEEDINGS SHALL BE APPLICABLE. ALL OTHER RECOGNISABLE VEHICLES, DEUTSCHES, BUILDINGS ETC. ARE NOT PART OF THE ACCTION. These are original products.     An inspection of the article is mandatory.   For legal reasons, no assistance can be provided in the event of any loading. The loading and fastening of equipment, vehicles and bicycles must be carried out by themselves. The acquirer must organize, arrange and carry out the collection and loading as well as the load securing at his own expense and risk. After confirmation of receipt of payment by the provider, the highest bidder has to collect the purchased item within 14 working days (Mo. – Fr.), unless otherwise agreed in writing. If no collection is made within the above-mentioned 14 days, a stand fee of 10 €/workday will be charged. This must be paid in cash at the time of collection.