The Bavarian state goods auction a used irrigation system with motor pump unit. Technical data and equipment:   Manufacturer: Röhren- und Pumpenwerk Bauer GmbH, Voitsberg (Austria) Type: Rainstar 65-250 TX Plus Year of construction: 2000 Hose trolleys and boom tripods with low pressure spray nozzles Working width of the boom stand (AS) with spray nozzles = 26 m Working width of the AS with spray nozzles and additional taillights = 36 m Hose trolley with reel and automatic hose intake via water turbine Hose drum equipped with PE pipe Tube length = 250 m Tube diameter = 65 mm 2 transmission gears for feed the hose reel is mounted on a rotary wreath so that the pipe can also be rolled across the direction of travel Track gauge of the axle is adjustable Attachment over drawbar with drawbar eye Support foot the control/operation of the hose infeed is carried out via the EcoStar 4000 S Irrigation Computer Control of the flow rate (m/h) Function for setting pre- and post-irrigation times Possibility for engine and shut-off valve test Indication of the periods Display of the currently extended hose length The following engine pumping unit shall be fitted to the sprinkler system: Manufacturer: Scova (Italy) Year of construction: 2001 Centrifugal pump: Caprari MEC-MR65-3/3A (Italy) Drive via water-cooled 3-cylinder diesel engine (Iveco 8035 E00 *7.00*) 83 hp engine power Manual suction pump for venting the suction line Maximum working pressure = 16 bar Maximum throughput = 100 l/min With automatic shut-off 1,100 kg, 98 dB Tank in chassis frame incl. suction tube with suction basket in 2018 a new plant was purchased, since then the irrigation is dry in the machine hall the installation has a CE marking (on the identification plate) Further technical adjustment values can be found in the performance table (photo no. 20)   Despite a longer service life, the irrigating system is functional, and maintenance was carried out annually in the pump unit. The unit was in operation until the end of August 2026, in contrast to the hose trolley. Due to normal use, the following known defects are present:   due to longer service life, a tyre from the boom stand is flat (valve defective) Couplings on the bar partly difficult Non-painting Paint partially peeled Light rusting on bare metal parts heavily dusted   Please note that the tractor to be seen on the photos is expressly not part of the auction!   No assessment or assessment was carried out. Therefore, it is strongly advised to visit the irrigation system before bidding (Monday to Thursday from 07.00 - 17.00 h, Friday from 09.00 - 12.00 h). This is only possible after prior telephone registration.   After the end of the auction and payment by bank transfer, the transfer takes place at the specified place. Payment and collection must be made within 10 days or by arrangement!     The bidder is responsible for the organisation of the necessary loading technology. Loading, securing cargo and transport are the responsibility of the new owner. For legal reasons, no support can be granted. At the time of collection, the pick-up party confirms with his signature that he is familiar with the applicable legislation on securing cargo and transport goods.