A Dücker UNA200 boom and edge strip mower, built in 2011, with the machine number 111039, is offered. At the time of the technical inspection on 24.06.2024 the device had 758 operating hours and was mounted on a HANSA APZ1003 carrier vehicle. In the test report, the overall state of care was rated as "good". The hydraulic supply is via the carrier vehicle. A mower head MKI 10 is specified as the working unit. A Schlegelwelle with Schlegeltype 900 and a specified speed of 2,700 rpm is fitted. Hydraulic block, pump/ventile, filters, couplings and fittings as well as the hydraulic drive were considered to be mostly in order when viewed. The following defects were documented during the technical inspection: The warning sign is partially damaged, road safety is not present and the hose ducts on the first arm are torn. In addition, the HD hoses are partly damaged or rubbed off. A slight imbalance of the Schlegelwelle was found on the mower head; in addition, the front stone impact protectors are damaged. Despite the deficiencies identified, the Dücker UNA200 was considered to be still operational at the time of the test. Basic technical data: Manufacturer: Dücker Type: UNA200 Year of construction: 2011 Machine number: 111039 Current operating hours: 813,5 h Mower head: MKI 10 Type of slurry: 900 Engine speed mower head: 2,700 rpm Hydraulic supply via carrier vehicle Ready to use at the time of testing