5 network devices from government stock are offered. The devices were decommissioned in 2026, but subsequently not tested again. The equipment has a CE marking. The condition is used. There are traces of use in the form of scratches, dirt and adhesive residues.   4x Network Switch (purchased in 2016) Model: Cisco WS-C2960XR-48FPD-I Number of ports: 48 Type of installation: 19" rack     1x WLAN controller (Cisco 5500 Series, Model 5508) (2011) Technical data of the manufacturer: Core Hardware Specifications Capacity: Supports 12, 25, 50, 100, or 250 access points (upgradeable via licenses) and up to 7.000 clients. Ethernet Uplinks: 8 configurable 1000BASE-T, 1000BASE SX, or 1000BASE LH transceiver slots (SFP options). Ports: 1 RJ-45 console port, 1 service port (10/100/1000 Mbps), and 1 utility/redundancy port. Dimensions: 1.75 x 17.30 x 21.20 in. (height 44 x depth 440 x width 539 mm). Weight: 20 lbs (9.1 kg) with dual redundant power supplies. Performance and Wireless Features Wireless standards: IEEE 802.11a, 802.11b, 802.11g, 802.11d, 802,11e/WMM, 80 2.11h, 80 2.11k, 80-2.11n, 80.2.11r, 80.2.11u, 802.3.11w, and 8021.1ac. Data Throughput: Line-rate performance across 8 Gigabit ports with minimal latency for mission-critical wirreres traffic. Mobility & Roaming: Layer 2 and Layer 3 fast roaming support with centralized control policies and automated Radio Resource Management (RRM). Security and Management Encryption Support: WEP, TKIP-MIC, AES (CBC, CCM, CCMP), DES, 3DES, SSL, TLS, and DTLS. Authentication: IEEE 802.1X, RADIUS, TACACS+, and local database. Management interfaces: HTTP/HTTPS web UI, CLI via SSH, Telnet, or Serial Port, alongside SNMP v1/v2c/v3 support     Status: The product has reached the end-of-life (EOL) / end- of-sale (EOS) status.     Accessories : There are power supplies for one switch available, the other three are offered without power supplies; no further accessories