For the auction is a used ZIRBUS high-pressure/process autoclave, model HDA 50/10/250, from the year 2009. The device has a stainless steel housing and is equipped with a protective grille panel, operating and display elements as well as various connections and fittings. The technical characteristics specified on the type plate are listed below.   Technical data: Manufacturer: ZIRBUS technology Model / type: HDA 50/10/250 Device No.: 2530 Year of construction: 2009 Electrical connection: 230 V / 50 Hz / 16 A Max. operating pressure: 10 bar Max. temperature: 250 °C CE marking: available Design: Stainless steel housing Operation: Control panel with on/off switches, pressure indicator/manometer and shut-off/control elements Protection/covering grid: available Base: stainless steel, with storage surface   Note: Since these industrial and research autoclaves of Zirbus are usually custom-made and according to customer-specific requirements (measured production for laboratory or production) directly in the factory, there is no standardized dimensions or a fixed unit weight in the data sheet for this model series. Based on the type designation HDA 50/10/250 (the 50 usually stands for the nominal chamber volume of&nBsp; about 50 litres) the following benchmarks are obtained:   Weight: Approximately 180 to 250 kg (empty weight). The autoclave has solid, thick-walled stainless steel walls for high pressure (10 bar) as well as a heavy protective basket for the fan/compressor on the front. External dimensions (without base): approx. 80 x 80 x 100 cm (width x depth x height). Total height (incl. base frame): approx. 150 to 160 cm.     Condition description: The stainless steel cladding shows visible scratches, signs of wear, dirt and discoloration. On the outer surfaces some streaks, abrasion and residue traces are visible. The protective grille at the front also shows signs of wear and dirt. In the middle area a wide brown tape/fixier track or bonding is visible. On the right side panel is an eye-catching adhesive/adhesive tape residue or repair site. The controls, switches and the pressure gauge have traces of age and usage. The base and the storage surface show dirt, scratches and signs of wear. Different cables, hoses and connections are available in the lower range. In the rear/inner area, technical components, lines and insulations are visible; there are traces of wear and dirt there as well.   Information on the offer: Inspection of the device possible by prior appointment. The device was removed from service in 2023. The goods are handed over in the existing condition.   Collection and transport: The acquirer undertakes to collect the machine at his own expense within 21 days of the surcharge. The loading as well as the proper load securing are carried out exclusively by the buyer or the pick-up agent commissioned by him. Disassembly and removal from the premises shall be carried out by the acquirer in his or her own responsibility. The machine is located on the ground floor and can therefore be transported flat.