Weight (kg): 517 Condition: Manufacturer Robert Bosch GmbH: Year of construction 2017: Model Technical dataManufacturer: Robert Bosch GmbHDevice: Roller brake test stand / Brake TesterType: BSA4Series number: 121306130Date of manufacture: 11/2017Country of production: Czech RepublicPower supply: 400 VPower frequency: 50 HzPhases: 3~Motor power: 2 × 3,7 kWPower consumption: 2×8 ASafety: 3 × 25 ATest speed: approx.5.2 km/hMax. testable axle load: approx 2.5 tMax. Overrun load: approx. 4.0 tMeasurement range Brake force: up to approx.6 kN per wheel, depending on the specific BSA4 versionRoll diameter: approx.205 mmRoll length: approx.305 mmColl-axle distance: ca. 381 mmRolly increase: approx.25 mmTest width: approx.50–2.200 mmDimensionsRoll set: approx.2.360 × 660 × 250 mm (B × T × H)Weight Castor set: approximately 420 kgWeight specification on existing packaging: 517 kgFeatures / FunctionsBosch BNet device busConnection of the brake dynamometer with a PC stationTransfer of the determined brake force measurements to the PCRoll brake dummy for cars and light commercial vehiclesTwo separate drive motors with 3.7 kW eachAutomatic test sequence, depending on configurationSlip monitoring / safety shut-offExit support via motor brakeAutomatic All-wheel detection with correspondingly equipped BSA4 configurationRobust design for professional workshop operationFire galvanized roller set with corresponding BSA 4 designFor installation in test road or workshop floor intendedNotes of the sellerNew qualityTest bench in original packagingLoading aid is available.