Technical data: Production volume: 33.5 × 20 × 30 cmWeight: 54.4 kgDimensions of the device: (W x D x H) 39.8 x 36.7 x 55.4 cm   For the auction is a used resin 3D printer from the formlabs brand from the stock of Stadtwerke Norderstedt.   Manufacturer / Model: formlabs / Form 3L   Condition:The printer was out of service for a longer period of time. After switching on, an error message is displayed.The 3L form can manage two resin cartridges. This function is unfortunately defective. It can only be printed with a cartridge (1L content). The filling of the pressure bed works fully automatically. Also here there is an error message from time to time, so that no car filling takes place first. When the printing bed has been filled manually by the cartridge (also generally faster than the auto function), the printer prints again without any problems.The printer shows the normal used traces, such as light scratches and resin residues on and in the housing. These could be removed by cleansing alcohol. However, it is always inevitable to use them.For further technical data, operating and consumption values, please refer to the official website of formlabs.   Accessories: Resin replacement cartridge x2; used resin tanks x3   Important note:Due to the age of the device, the existing error message as well as the not fully verified functionality, the printer is expressly auctioned as defective or as a spare part carrier. The printer, however, had the last impeccable print with us, except for the described defective functions: car filling and support of only one cartridge.   Device was reset to factory setting and all data deleted.   The collection must be made within 10 days (Monday -Thursday between 08:00 am - 3:00 pm and Friday between 08:00 pm - 11:00 am) and by arrangement! For further questions please contact ascheffler@stadtwerke-norderstedt.de.   All objects that may be visible on the photos – except the vehicle offered and the designated special accessories – are not part of this auction!