Welding machine manufacturer EWM, type: Taurus 401 Basic FKW Commissioning: 2014 - Machine is fully functional, technical and electrical testing until May 2027 (last test May 2026) Standard welding system for MIG/MAG, TIG and manual electrode welding (E-Hand), with easy operation and individual parameter settings. Equipment: Performance data & Welding current - setting range welding current: 5A – 400A - setting range welding voltage: 14.3V – 34.0 V (MIG/MAG) - Switch-on time (ED) at 40°C: 100% ED at 400 A - Idling voltage: 79V Electrical connection - Mains voltage: 3x400V - Mains frequency: 50 / 60 Hz - Network security: 3x25 A - Max. connection power: approx. 13.9 kVA up to 17.5 kVA Wire feed & Cooling - Wire feed speed: 0.5 m/min – 25m/min - Wire drive: Precise 4-roll drive (37mm rollers) - Wire coil diameter: Standardized coils up to 300mm - burner cooling: water-cooled (intigated liquid cooling, FKG version) - Welding torch connection: Eurocentral connection Geometry & Protection classes - Dimensions (L x W x H): 1085 mm x 450 mm x 1003 mm - Weight: approx. 121,5 kg - Protection class: IP 23 - EMC class: A - Structured standards: IEC60974-1, -2, -5, -10 Accessories: Dinse water-cooled burner (3m long) Welding current return with terminal Wired remote controller Hose connection for protective gas Plug 32 A Recording for continuous wire coil 4-roll wire feed system Operating instructions CE marking Signs of use by daily use (light scratches and sweat residues) - see pictures