Year of construction: 2003 ed. Total weight: 18.000 kg ed. Axle load (front/back): 9,000 / 9,000 kg Maximum permissible speed: 60 km/h Track gauge: 2,000 mm Fork: V-shape, 1,800 mm long Axles: BPW axes Brake system: two-wire compressed air braking system with automatic load-dependent brake adjustment, manufacturer Haldex Chassis frame: robust, stable frame, welding design made of double T-carriers 200 x 100 mm, ST52 Tilting bearings: 4 reinforced tipping bearings Tilting cylinder: 2 units of three-stage hydraulic cylinders with 11.7 t load capacity each in stage 1, type D1-60-3x200/1 and volume divider for uniform tilting of the trailer Suspension: combination of leaf springs 12 mm layer thickness and rubber suspension Rotary wreath: HE 12 L Tilt bridge left tiltable Front, rear and right side walls are each welded through board walls and firmly with the tipping bridge, the left side is designed with lower and upper board, board partition (bottom/top) 500 / 400 mm the lower side wall opens over a kinematics and is provided with 3x locking on the side wall, The upper side of the board is easily dismountable by screw connection.   The trailer has been used by the Water Association since its approval. He no longer has TÜV and strong corrosion damage, especially back right. The TÜV test was not passed due to corrosion. The tyres are relatively new. The trailer was still in use this year and is functional. The trailer can be visited by the water body. Pick-up is the responsibility of the acquirer.