An MEP Shark 281 CCS band saw is auctioned for cutting metals on miters from 0° to +60° including saw blade already used. Additional accessories are not included. With the CCS (Cut Control System) in addition to manual cuts, individual cuts without operator are also possible.    The maximum screw opening is 285mm. The belt size is: 2950 x 27 x 0.9 mm. The power of the saw blade engine is 1.5 kW and the blade speed can be adjusted in two gear stages. 36 and 72 m/min are possible The cutting area round has a size of Ø250 mm, the rectangular one is 280 x 200mm Dimensions: width 800 mm x depth 1785 mm   The saw was built in 2016 and weighs 370 kg.    It has a CE marking and is fully operational. Both dents in the body of the machine body and paint racks are distributed across the entire machine. In the coolant absorber there is a grate through the metal chips. However, these damages do not affect function or durability.   After prior appointment, the saw can be tested on site during the auction period.   The data sheet is available on the website of the manufacturer.