It was purchased about 4 years ago but has not been used by current owners. It was driven up to the current owner picked it up so everything should work but needs to be reviewed. Including transfotmator, cooling unit Hyfra and gearbox. Information from manufacturers: Work Area & Capacity • Motion range (X × Y × Z): 3100 × 1550 × 120 mm (Constructed for standard plates up to 3000 × 1500 mm). • Maximum workpiece weight: 730 kg. • Maximum material thickness: • Black plate (Mild Steel): 20 mm. • Stainless steel (Stainless Steel): 15 mm. • Aluminium: 10-12 mm. Speed & Performance • Positioning speed (X/Y): 60 m/min per axis, with a simultaneous axle speed of 85 m/minute thanks to its "flying optics" architecture where the material lies still while the laser head is moving. • Cutting speed: 0 ~ 30 m/min. • Positioning accuracy: ±0,01 mm. Resonator & Control System • Laser source / Resonator: Mitsubishi ML40CFX carbon dioxide laser (CO2). • Laser gas consumption: Very economical with a consumption of about 3 litres per hour. • CNC control system: Amada AMNC-PC / LC20BP2 which is PC-based and equipped with touchscreen. Dimensions & Installation • External dimensions (L × B × H): Approximately 6674 × 3263 × 2100 mm (excluding peripherals such as palette exchangers). • Cooling unit (Chiller): Requires an external cooling system (often a HYFRA SVK unit) with a cooling capacity of about 67 kW.