Sand dredger for use in gravel pit. NB: Has been used in a "lake" in a gravel pit and is not designed to sail at sea and has therefore not been registered as a ship!!! There are therefore no ship registration documents!!! Ship Hull: Length 28.3 m x Width 3.97 m and transport height approx. 3 m when the upper part of the console with the wire game is cut off. (Length piece for the hull included, see pictures). Has been sandblasted and primed and painted in 2017. Wire Game: 4 pieces to navigate. Engine: Caterpillar C15 - was changed about 8 years ago and has only driven 6300 hours!. Fuel tanks: 2 units of 6500 litres each, but at present a tank of 700 litres is used (for one day's work) and two compressors on board which suck the fuel from land (by this method oil leaks and environmental damage, if leakage occurs in the fuel hose). The dredging work can be controlled both manually and automatically, which is controlled via vacuum and pressure. Suction pump: Larsen and Carlsen 14" inch in good condition (Is with loose replaceable food/rotor and the diaphragm • There is easy to change and maintain at no great cost) - and spade pump/swelling system for spade head • Working capacity is about 200-250m3 clean gravel and rocks per hour. 5 pieces are included: 12 m x 0,406 m tubes, each tube is mounted on 2 float-pontons and has 2 walkways each (NB!: The additional pipes and pontons shown in the pictures are not included!!!). Suction depth can be increased by mounting additional pipes (you can obtain them yourself). See more pictures and information - and other auctions at www.fymasauctions.dk Larsen & Carlsen 28 m Sand Dredger - Sand dredger for gravel pit Buyer's Salary / Köparprovision / Buyer 's premium / Aufgeld More about Fymas Fymas is founded in 1975 We buy and sell everything within used construction- agricultural machinery, cranes and lifts.