Serial number: N0219105; Measuring Range: 500 mm x 700 mm x 400 mm (X x Y x Z); Maximum Workpiece Height: ~ 545 mm; Maximum Workpiece Weight: 180 kg; Maximum Drive/Measuring Speed: Up to 519 mm/s (3D); Resolution: 0.0001 mm (0.1 μm); Equipped with Reinshaw PH1 shank mounted manual probe head; Weight: 125 g (4.41 oz); Probe mounting: M8 thread; Head mounting: MS range of shanks to suit CMM; Suitable interface: PI 200-3; Probe status indication: 1 LED; Cable connection: 5-pin DIN 180° socket; A-axis indexing: Swivel of 115°, locked with a 3 mm A/F hexagonal key; B-axis indexing: 15° steps through 360° (non-repeatable); Overtravel break load: Adjustable from 0.2 N to locked solid; Equipped with Reinshaw SCR200 stylus change rack; Weight: 0.75 kg; Mounting orientation: Vertical or horizontal; Mounting fixture: Single stud (M8, M10); Number of ports: 6; Repeatability of stylus change (2σ) at 50 mm: Automatic ≤ 1 μm, Manual ≤ 2 μm; Entry speed: Unrestricted; Module pull-off force: 800 g maximum; Overtravel protection: Electromechanical (minimum deflection: 5); LED indicators: Power: Green, Status: Red (flashing during probe inhibit); Change cycle detection: Optoelectronic beam system with Hall effect proximity sensor; Multi-rack usage: Up to two SCR200 units (12 ports) may be connected with a special cable; all needed documents will be provided in order to restart the machine Nr. Inv: 2120; Due to the dual-use classification of these instruments, all transactions involving them must be approved by Mitutoyo Japan; Mitutoyo can also provide transportation preparation, installation, and commissioning at the new location as a paid service. Optional dismantling and loading services are available on site.