A second-hand ISEKI TG 5470 AQLK with four-wheel drive, driver's cabin, front loader, pallet fork, additional weight including snow sliders is required. In addition, there is a complete second wheel set with four wheels.    Technical data Manufacturer: ISEKI Type: TG 5470 AQLK Type of vehicle: self-propelled machine / tractor Vehicle identification number: NP001468 Engine: 4-cylinder diesel engine Engine capacity: 2,197 cm3 Power: 34 kW / approx. 46 hp Drive: four-wheel Gearbox: 12 forward-/12 reverse gears Operating hours: 1,482 h according to the operating hour counter Year of construction: 2013 Color: Blue Unladen mass: 1,955 kg Maximum permissible mass: 3,500 kg Seats: 1 Doors: 2 Fuel: Diesel   The tractor has among other things: All-wheel drive Driver's cabin Hydrostatic power steering Hydrostatic transmission Differential lock Wet disc brake Three-point force lifter category I Rear hydraulics Rear PTO shaft 540/1000 U/min Centrifugal shaft 2000 U/min Hydraulic auxiliary control units Towing device Agricultural tyres (front 7.00-16, rear 13.6-28) Lighting system Working headlights Windscreen wipers ISEKI front loader Hydraulic front loader operation Front loader fork Rear mounting device Rear lifter Upper handlebars Lower thrush FROST attachment type 13453 additional complete wheel set with 4 wheels 2 keys   Condition: The tractor is in a proper condition, used and in accordance with its age and operating performance. The blue paintwork and the body make a good impression overall. The driver's cabin and glazing appear complete. Normal pollution and wear and tear due to use and use are present. The front loader has clearly visible signs of wear. Paint abrasion, scratches as well as some rust or corrosion approaches can be seen on the metal parts and in particular on the mounting. The snow slider or the FROST attachment also show clear signs of wear. The orange paintwork is partly worn out or broken off. Wear marks and surface corrosion are visible on edges and metal surfaces. The rear mounting device and the lower handlebars also have traces of use and some rust approaches. The tyres appear to have a clearly marked agricultural profile. The existing tire profile depths of about 18 to 19 mm are given. The vehicle is ready to go. A rough function test was carried out during driving. The front hydraulic systems were also tested. The functions are given and the hydraulics are visibly tight. A complete technical test of all components could not be carried out. The sliding shield shows a crack in the hydraulic hose. (see photo)   The number of previous owners, the first registration and the date of the next main investigation are unknown.  The approval certificate Part I and II are not available. These must be applied for independently by the entrant. A certificate is issued for this purpose.     A survey before bidding is expressly recommended.  bids should only be submitted after own examination or inspection.