Plough-equipped tilt and crane car Is still in production so meter position will increase Almost new tyre shaft 1+2 Sold because of new purchases 3 owners then new and went on driving for the municipality then new Plough mount vv95 supplied loosely The rear spreader joint is also supplied loosely The crane is a Hiab 144 E-5 Hipro 5 hydraulic extension to a range of about 15,1 meters Lifting capacity at different distances (examples for E-5): • 2.6 metres: about 5,000 kg • 4,8 metres: approx. 2,700 – 2,800 kg • 6.6 metres: approx. 1 860 – 1 920 kg • 8.5 meters: approx. 1 340 – 1 400 kg • 10.6 metres: approx. 1 020 kg • 15.1 metres (max. hydraulic): approx. 700 kg Hose and set Remote control with charger and dual batteries Sent to April 2027 ( +2 months ) Tilting construction from Sörling Hydraulic automatic sleeve Foldable gravel-reinforced clamps Small front hatch with steps for easy access to the truck Internal recessed bathing eyes and pole holes Height of clamp about 0.8 meters Internal width approx. 2,45 meters Internal length about 5 meters Push and return back NOTE!! Loose lifting equipment is not included! Facts from the Swedish Transport Agency: Annual tax SEK 3525 Payment month/s October Length 8600 mm Width 2590 mm Height Data missing. Static weight (actual weight) 14850 kg Maximum load weight 13150 kg Total weight 28000 kg Initial total weight 28000 kg Tax weight 28000 kg Permitted load weight 13150 kg Front overhang 1650 mm Rear overhang 1580 mm Length of cargo compartment 4980 mm Axle - 1 Max axle spacing shaft 1-2 4300 mm Guaranteed axle/bogie pressure 9000 kg Axle - 2 Max axle spacing axle 2-3 1370 mm Guaranteed axle/bogie pressure 19000 kg Other AXEL 3 TWO SYRD. UREATANK 60 DM3. It's all right, it's okay. It'll be all right.