Year 2000, 2005; (W x H x D) approx. 170 x 176 x 132 cm; the plants can form films with structural characteristics on a micrometer scale. Due to the design of the machines (coil structure of the tools) no larger bodies can be formed than those with a depth of 5 mm and a shape area of 12.56 cm² and 2 mm and 82.5 cm&Sup2 respectively; The system consists of a heating station (plate heating) and a cooling station (water cooler) in which the forming tools are taken up with the foil contained in it. The screwable mould tool sets are made of solid measurement manufactured for a good heat/cooling transition. For the heating and cooling process, the stations are used after inserting the mould tools closed by pneumatic cylinders. All valves of the system (vacuum pump and pressure attack) shall be operated manually. The overpressure required for the thermoforming of this system is determined by the discharge Nitrogen produced from a storage bottle (not part of the lot stock). The system is designed for pressures up to 20 bar and temperatures up to 200°C. The system is controlled by a self-built unit (not CE-certified, because of the scientific purpose); 1 vacuum pump with defect. Notes: - It is possible that BIOS, UEFI or installed drives are provided with an unknown password, which cannot be made available. - In order to clarify open questions, the inspection or contact recommended with the client. - The usage or testing periods have expired. - The plant has to be dismantled for removal. Bid base: item Location: 76344 Eggenstein-Leopoldshafen