Manufacturer: HOBART GmbH (Germany)   Year of manufacture: 2011   CE markings available Model / series: PREMAX CP series MKN article number: 2020327C Specific type: CP-L-A-CDC (module configuration with large-space pre-wash, main washing zone and CDC drying section)     Description:   Equipped with a digital graphic display for process monitoring, integrated haze and brood extraction, automatic basket transport and wash arms.   The body is made of stainless steel.   Main machine: HOBART PREMAX CP-L-A-CDC basket-flow dishwasher.   Inlet system and table program: Large stainless steel crockery sorting station with upper and lower storage floors for rinsing baskets. Pre-wash table with integrated deep basin   Measurements of work table: Width 1200 mm Length 2700 mm Height 1500 mm   Transport system: Mechanical stainless steel run-out curves and subsequent roller conveyor for the automatic run-off of the baskets.   Water treatment: External HYDROLINE Demineralization Facility (MKN/Hobart System).   Chemical dosing technology: Wall mounted, external dosing system (2x control unit for cleaners and rinsers).   The dishwasher is connected to the canteen ceiling via an exhaust air system.     Accessories: 20 plastic baskets in blue, 10x suitable for plates and 10x with flat bottom.     External dimensions: Total length 6000 mm Height 2800 mm Width 2700 mm     The total weight of the plant including all inlet/outlet tables and water treatment is estimated at approx. 850 kg.   Professional large kitchen connections for hot/cold water, waste water as well as an electric high current fixed connection (400 V / total connection value depending on heating regulation approx. 32 to 36 kW) are required.     Important notes on settlement: The dishwasher was in use in our in-house canteen and is in a used condition. Most recently, the device was in use in April 2025. A comprehensive functional test in continuous operation was not carried out within the scope of the current utilization.   The system has normal traces of use corresponding to age and intensive commercial use (superficial scratches on stainless steel surfaces and storage-related dirt).   We strongly recommend a visit to the equipment on site, which is possible and desired after prior telephone appointment at the location.   Due to the light conditions during the photos, the colors on the photos may differ slightly from the actual colors. Please note that the devices have to be removed independently and the DPMA will not provide (loading) assistance. The dismantling and transport are carried out at your own expense. Final cleaning by the DPMA does not take place. Since the plant consists of heavy, bulky stainless steel components, it is recommended to bring with it sufficient personnel and suitable means of transport for dismantling.