Volvo FE 320 6x2*4 HIAB 166 E-5 Hipro crane & Gear (2007) The car is Swedish sold, converted to environmental class Euro 5 and equipped with air suspension around and steerable last axle. This makes the combination smooth in narrow urban environments and on construction sites, while providing high stability and comfort during driving and crane work. The combination is in good use for its age and measurement position of 39 636 mil. Both engine, manual gearbox, hydraulics and crane are running fine. The radio controlled crane (year model 2007, serial number 16604584) has five hydraulic extensions with a total range of 14.9 meters and a lifting height of approximately 17 meters. With the hose and pipe kit drawn and the included bucket with rotator and pallet fork, the car is ready to be put directly into production on contract, construction or transport assignments. Inside, the cab offers a cosy and cosy driver's environment with button-stopped interiors, AC, back camera, multimedia system, etc. The car is serviced in the spring of 2026, EU inspected until 30 December 2026 and is supplied with newly inspected tachograph. (Please note that flakk is not included in the purchase, but may be purchased by agreement). Crane and lifting capacity (HIAB 166 E-5 Hipro) • Execution: Year model 2007 , 5 hydraulic push-out, radio control, hose and pipe kit and manually pull-out support legs. • Lift diagram (standard / ADC mode): • 2.7 m: 5 600 kg / 5 900 kg • 4.4 m: 3 200 kg / 3 400 kg • 6.3 m: 2,200 kg / 2,300 kg • 8,3 m: 1,560 kg / 1,680 kg • 10.4 m: 1,220 kg / 1,300 kg • 12.6 m: 960 kg / 1 040 kg • 14.8 m: 820 kg / 880 kg • Supplied tools: 65 cm wide dig/load bucket with rotator and pallet fork with 1 000 kg lifting capacity. Technical data — Chassis, Engine and Dimensions • Engine & Driveline: 6-cylinder diesel with 320 hp (235 kW) with AdBlue, manual gearbox, Euro 5-converted (T31KA), hydraulic pump on gearbox. • Chassis & Wheels: 6x2*4 (rear drive with steerable running axle), front and rear air suspension, disc brakes all around. • Weights: Service weight 13 670 kg, maximum load weight 12 330 kg, total weight 26 000 kg. • Dimensions: Length 8.70 m, width 2.57 m, height 3.50 m. Center lifting hook to center support roll is 5 070 mm. • Tyre pattern: Axle 1 (385/65 R22.5) approx. 10/13 mm, Axle 2 (315/80 R22.5.) approx. 18/15/21/20 mm, Axel 3 (315/80 R22.15) approx 10/3 mm. • Other equipment: Roof and side spoiler package, extra light, flashlight, rotor light, LED backlight, dual batteries and chargers Facts from the Swedish Transport Agency: Length 8700 mm Width 2570 mm Height Data missing. Static weight (actual weight) 13670 kg Max. load weight 12330 kg Total weight 26000 kg Initial total mass 26000 kg Tax weight 26000 kg Permitted load mass 12330 kg Front overhang 1440 mm Rear overhang 1070 mm Axle - 1 Max axle spacing shaft 1-2 4750 mm Guaranteed axle/bogie pressure 8000 kg Axle - 2 Max axle spacing axle 2-3 1350 mm Guaranteed axle/bogie pressure 19000 kg CENTRUM LYFT CROCHET TO CENTRUM ASSISTANCE ROLE 5070 MM. T31CA CONVERTERED FOR REDUCED EMISSIONS OF GAS WHICH CAN BE APPROVED EQUIVALENT REQUIREMENTS ENL 2005/55/EC RAD B.2 IN POINT 6.2.1 OF ANNEX I, EURO V.