This lot is composed of: A) 2016 Colosio PFO 1200; B) ABK SP13-65 Hydraulic Deburring and Trimming Press ; C) Kuka KR 60-3 F Robot; D) 2 Conveyours; E) Cooling tank 1 m3; F) AED DAG 1000 Spray Robot A) Equipped with Green Line Motors Bosch - RexRoth, with inverters; Clamping force: 12,115 kN (1235 T); Platen dimensions: 1540 x 1540 mm; Clearance between tie bars: 775 x 775 mm to 800 x 800 mm; Tie bar diameter: 205 mm; Die height (max/min): 1100 mm / 450 mm; Moving platen stroke: 1000 mm; Maximum injection force: 828 to 850 kN; Injection stroke: 730 mm; Ejection force: 563 kN; Ejection stroke: 220 mm; Distance between tie bars: 995 mm; Tie bar diameter: 205 mm; Maximum shot weight: 17.3 kg; Maximum projected area (400 kg/cm²): 3087.5 cm²; Casting cycles (empty): 5 cycles/min; Maximum shot weight (aluminum): approx. 20 kg; Own weight: 58,300 kg; Width: approx. 3700 mm; Length: 10,981 mm; Height: 3878 mm. B) With automated tilt extraction table; Press Force: 650 kN (65 Tonnes); Hydraulic system: Side-mounted hydraulic; Overall height: 4192 mm; Height to working area: 1700 mm; Overall Width: 1740 mm; Overall Depth: 2100 mm; Base width: 1370 mm; Base Depth: 870 mm; Anchor bolt spacing: Approx. 400 mm; Press opening dimensions, Daylight opening: 1000 mm; Lower working height: 700 mm; Upper Tool Area: 300 mm; Working area: 400 mm / 600 mm / 800 mm; Maximum working area: 800 x 650 mm; Table width: 1100 mm; Overall table support: 1320 mm; Visible ram diameter: Ø50 mm C) Payload: 60 kg; Maximum reach: 2033 mm; Number of axes: 6; Repeatability: ± 0.06 mm; Robot weight: approx. 665 kg; Mounting position: Floor; Controller: CR C4 with serial number 11038316 and command console; Axis 1 (J1): Motion range ± 185°, speed 128°/s; Axis 2 (J2): Motion range +35° / -135°, speed 102°/s; Axis 3 (J3): Motion range +158° / -120°, speed 128°/s; Axis 4 (J4): Motion range ± 350°, speed 260°/s; Axis 5 (J5): Motion range ± 119°, speed 245°/s; Axis 6 (J6): Motion range ± 350°, speed 322°/s; Controller type: KUKA KR C4. D) Gambazzi 135404 E) Capacity: 1 m3 F) Machine type: 2-axis die spraying equipment (horizontal/vertical); Press Size Compatibility: 500 to 2000 Tons locking force; Vertical Stroke Range: 1200 mm to 2000 mm; Horizontal Stroke Range: 1000 mm to 2000 mm; Lubricant Control: Up to 2 proportional valves for varying mixtures; Operating Purpose: Cyclical treatment of die surfaces to cool, lubricate, and clean molds; A) Inv Nr.: 1019; B) Inv Nr. 2014; C) Inv. Nr. 2054; D) Inv. Nr. 1062 and 2024; E) Inv. Nr. 1076; F) Inv. Nr. 1077; Approximation footprint 9000 x 11500 mm; Colosio approx. dimensions and weight: Own weight: 58,300 kg; Width: approx. 3700 mm; Length: 10,981 mm; Height: 3878 mm; Optional dismantling and loading services are available on site.