This lot is compose from: A) Colosio PFO 750 GL; B) Kuka SEP10-07-65 Trimming Press; C) Kuka KR 60 robot; D) AED DAG 1000 Spray Robot; E) Cooling Tank: 1400 x 1400 x 1450 mm; This lot does not include Melting Furnace Inv. Nr: 4014. A) Equipped with Green Line Motors Bosch - RexRoth, with inverters; Closing force: 785 T; Opening force: 16.26 T; Maximum injection force: 76.6 T; Minimum injection force: 25.2 T; Central ejector force: 37.9 T; Central ejector return force: 19.7 T; Maximum stroke of moving platen: 750 mm; Minimum stroke of moving platen: 400 mm; Injection stroke: 650 mm; Central ejector stroke: 170 mm; Maximum die height: 950 mm; Minimum die height: 400 mm; Tie bar spacing: 800 mm; Platen dimensions: 1270 x 1270 mm; Tie bar diameter: 170 mm; Maximum casting area (400 kg/cm²): 1960 cm²; Idle cycles: 6 cycles/min; Operating pressure: 140 bar; Tank capacity: 2410 l; Number of injection positions / axis offset: 6 / -30, -80, -120, -150, -190, -240 mm; Maximum shot weight (Al): 12.5 kg; Minimum mold size: 565 x 565 mm; Nitrogen pre-charge pressure in accumulator: 120 bar; Nitrogen pre-charge pressure in intensifier accumulator: 115 bar; B) HN (Height feeding tube), standard: 4680 mm; HN (Height feeding tube), special version: 2180 mm + Δ(TH); LW (Inside width table X/Y): 880 / 580 mm; UHG (Lower edge fixed covering): 2100 mm; TU (Table lower edge): 530 mm + Δ(TH); TH (Table height): standard 800 mm, maximum 1200 mm; XT (Table plate total length): 1260 mm; YT (Table plate total width): 1000 mm; LW-X (Table clamping area length): 1000 mm; LW-Y (Table clamping area width): 700 mm; TD-X (Distance between table T-nuts): 800 mm; TD-Y (Distance between table T-nuts): 550 mm; XS (Ram total length): 1160 mm; YS (Ram total width): 960 mm; LW-X (Ram clamping area length): 1020 mm; LW-Y (Ram clamping area width): 720 mm; SD (Distance to T-nut on Ram): 120 mm; T-nut spacing 1: 200 mm; T-nut spacing 2: 300 mm; T-nut spacing 5: 200 mm; T-nut DIN: 18. C) Payload: 60 kg; Maximum reach: 2033 mm; Number of axes: 6; Repeatability: ± 0.06 mm; Robot weight: approx. 665 kg; Mounting position: Floor; Controller: CR C4 with serial number 11038316 and command console; Axis 1 (J1): Motion range ± 185°, speed 128°/s; Axis 2 (J2): Motion range +35° / -135°, speed 102°/s; Axis 3 (J3): Motion range +158° / -120°, speed 128°/s; Axis 4 (J4): Motion range ± 350°, speed 260°/s; Axis 5 (J5): Motion range ± 119°, speed 245°/s; Axis 6 (J6): Motion range ± 350°, speed 322°/s; Controller type: KUKA KR C4. D) Machine type: 2-axis die spraying equipment (horizontal/vertical); Press Size Compatibility: 500 to 2000 Tons locking force; Vertical Stroke Range: 1200 mm to 2000 mm; Horizontal Stroke Range: 1000 mm to 2000 mm; Lubricant Control: Up to 2 proportional valves for varying mixtures; Operating Purpose: Cyclical treatment of die surfaces to cool, lubricate, and clean molds; E) 1400 x 1400 x 1450 mm A) Inv. Nr: 1049; B) Inv. Nr: 2099; C) Inv. Nr: 1063; D) Inv. Nr: 1070; E) Inv. Nr: 2021; Approximation footprint 9000 x 6500mm; Die casting machine dimension and weight: External dimensions (W x L x H): 2600 x 8465 x 3492 mm; Total weight (machine only): 35,075 kg; Optional dismantling and loading services are available on site.